12V TRANSFORMER FOR VERTICAL AND HORIZONTAL HEATED TOWEL RAIL 48W/72W

12V Transformer for Single Heated Towel Rails

This transformer is designed to meet multiple safety standards, including the Australian and New Zealand electrical safety certifications, this provides enhanced safety assurance for product use.

The 12V transformer is suitable for the all the low voltage modular heated towel rails. A single transformer can support multiple towel rails, with the appropriate power output determined by the combined wattage of all the towel rails.

Power Calculation Examples:

1. One Towel Rail:
   If you need one rail consuming 20W , you only need to select a transformer with an input power of 48W.

2. Two Towel Rails:
   If you need two rails, each consuming 20W, the total power required would be:
   2 x 20W = 40W.
   In this case, select a transformer with a power output of 48W.

3. Three Towel Rails:
   If you need three rails, the total power requirement would be:
   3 x 20W = 60W.
   In this case, select a transformer with a power output of 72W.

Important Considerations:

• The transformer must have a power rating higher than the combined total power of the towel rails you plan to use.
• Installation Distance: The maximum distance between the towel rail and the transformer should not exceed 2 meters.

By following these guidelines, you can ensure safe and efficient operation of your heated towel rails.